Part Number
Part Number:
NSN:
NIIN:
Item Name:
PLATE , MOUNTING
Definition:
A METALLIC OR NONMETALLIC ITEM WHICH IS RIGID, FLAT AND GENERALLY SMOOTH. ITS THICKNESS IS SMALL IN COMPARISON TO ITS LENGTH AND WIDTH. IT IS DESIGNED FOR MOUNTING ANOTHER ITEM AND MAY HAVE DRILLED OR THREADED HOLES OR OTHER FACILITIES FOR MOUNTING TO A SUPPORTING OBJECT OR SURFACE. SEE SUPPORT, AS MODIFIED. DO NOT USE IF A MORE SPECIFIC NAME APPLIES.
CAGE Information
| Code | Company |
|---|---|
| 01417 | GENERAL DYNAMICS LAND SYSTEMS INC DB |
Federal Supply Class
Title
HARDWARE, COMMERCIAL
Inclusions:
INCLUDES ACCESS COVERS; BUMPERS; CASTERS; CABINET AND DOOR HARDWARE; CLEVISES; HINGES; LATCHES; STRAPS AND STRAPPING; TURNBUCKLES; WEBBED STRAPS.
Exclusions:
EXCLUDES WEAPONS SYSTEM HARDWARE (FSC 5342).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TY 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| FEAT | SPECIAL FEATURES | 0.94" OF THE WIDTH OF PLATE IS INCLINED ON AN ANGLE (-5 DEGREES);WSD IS M-1 ABRAMS TANK |
| ABRY | LENGTH | 16.340 INCHES MINIMUM AND 16.400 INCHES MAXIMUM |
| SHPE | SHAPE | SPECIAL |
| SFTT | SURFACE TREATMENT | ANODIZE |
| ABTJ | MOUNTING HOLE QUANTITY | 13 ALL HOLES |
| ABTB | MOUNTING HOLE DIAMETER | 0.250 INCHES MINIMUM ALL HOLES AND 0.310 INCHES MAXIMUM ALL HOLES |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| ABGL | WIDTH | 2.880 INCHES NOMINAL |
| ACHY | MOUNTING HOLE TYPE | UNTHREADED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| AGAV | END ITEM IDENTIFICATION | 5420-01-430-5403 |
| ALGC | MOUNTING CONFIGURATION | 5 HOLES ALONG OUTSIDE EDGE OF FLAT SECTION OF WIDTH; 1 HOLE AT THE CORNER OF CUT-AWAY SECTION; 7 HOLES CENTERED ALONG THE ANGLED SECTION OF WIDTH |
| ABNM | THICKNESS | 0.060 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |