Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 03677 | ANTHONY YORK CO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMCW | FIRST END FLAT DEPTH | 0.2200 INCHES NOMINAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMHD | SECOND END HOLE DEPTH | 1.500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 7.500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLATTED |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.870 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMDL | FIRST END DIAMETER | 2.7500 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| AMCX | FIRST END FLAT LENGTH | 1.000 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | 2.750 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.5000 INCHES NOMINAL |