Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 11236 | CTS CORP BERNE DIV THICK FILM PRODUC |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 NOMINAL MILS AND 0.105 NOMINAL CENTIMETERS |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| ADAU | BODY HEIGHT | 0.540 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0/+250.0 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| ADAT | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CBME | CUBIC MEASURE | 0.055 CUBIC INCHES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 7TH SECONDARY QUALITY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/3 GOVERNMENT SPECIFICATION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 16200.0 MAXIMUM |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |