Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 10989 | PALL AEROPOWER CORP SUB OF PALL CORP |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADNP | DROP PRESSURE | NOT RATED |
| AGCW | WIRE DIAMETER | ANY ACCEPTABLE |
| AZKQ | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 550.0 DEG FAHRENHEIT MAXIMUM |
| ADNK | FLOW DIRECTION | PARALLEL |
| MATT | MATERIAL | STEEL FILTERING MEDIUM |
| ADAS | BODY INSIDE DIAMETER | 0.280 INCHES NOMINAL |
| APGF | DESIGN TYPE | REUSABLE |
| CRXW | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE |
| AKSX | MESH SIZE | ANY ACCEPTABLE |
| AZTL | BODY OVERALL LENGTH | 2.000 INCHES NOMINAL |
| ADNQ | DIFFERENTIAL PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| ABPM | BODY DIAMETER | 0.330 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
| ADNH | FILTRATION RATING IN MICRONS | 5.0 NOMINAL |
| FEAT | SPECIAL FEATURES | WITH 37 DEG FLANGE ON INLET END |
| MATT | MATERIAL | STEEL CONTAINER/CARTRIDGE |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |