Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 73197 | HI-SHEAR CORPORATION |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASB | FASTENER LENGTH | 1.201 INCHES MINIMUM AND 1.248 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CRHC | HOLE CONFIGURATION STYLE | SPLINE |
| AAUB | HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZH | HEAD MINOR DIAMETER | 0.517 INCHES MINIMUM |
| AASU | HEAD HEIGHT | 0.187 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AAUR | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| AASA | THREAD LENGTH | 0.451 INCHES MINIMUM AND 0.498 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |