Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
Code | Company |
---|---|
73197 | HI-SHEAR CORPORATION |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
AASU | HEAD HEIGHT | 0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
THSD | THREAD SERIES DESIGNATOR | UNJF |
AAJD | THREAD CLASS | 3A |
CSYM | SURFACE FINISH | 6.0 MICROINCHES THREADS |
AATB | WIDTH BETWEEN FLATS | 1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM |
CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
AAJF | THREAD DIRECTION | RIGHT-HAND |
CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
ANEE | GRIP LENGTH | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 16 |
AASK | HEAD STYLE | HEXAGON |
AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
MATT | MATERIAL | TITANIUM ALLOY OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
AASA | THREAD LENGTH | 0.552 INCHES MINIMUM AND 0.592 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 2.812 INCHES MINIMUM AND 2.832 INCHES MAXIMUM |
CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.684 INCHES MINIMUM ALL HOLES AND 2.714 INCHES MAXIMUM ALL HOLES |