Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 73197 | HI-SHEAR CORPORATION |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AATC | EXTENDED WASHER DIAMETER | 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.849 INCHES MINIMUM AND 1.879 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AATB | WIDTH BETWEEN FLATS | 0.439 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |