Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 10855 | CARRIER CORPORATION DIV CARRIER TRAN |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.5000 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.5000 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.750 INCHES MINIMUM |
| FEAT | SPECIAL FEATURES | 1/32 IN. RADIUS ON SHANK UNDER HEAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASU | HEAD HEIGHT | 0.375 INCHES NOMINAL |
| CQHQ | MINIMUM YIELD STRENGTH | 100000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| AASB | FASTENER LENGTH | 2.625 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | 0.281 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 240.0 BRINELL STANDARD MINIMUM OVERALL AND 280.0 BRINELL STANDARD MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP 3135 OVERALL |
| AASK | HEAD STYLE | DEE |
| ANEE | GRIP LENGTH | 1.875 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.125 INCHES NOMINAL FIRST HOLE |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.125 INCHES NOMINAL FIRST HOLE |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AASL | HEAD DIAMETER | 0.750 INCHES NOMINAL |