Part Number
Part Number:
NSN:
NIIN:
Item Name:
RIVET , BLIND
Definition:
AN ITEM CONSISTING OF TWO OR MORE OF THE FOLLOWING COMPONENTS: STEM, RIVET BODY, SLEEVE, EXPANDER, BOLT, AND COLLAR. IT IS A HEADED FASTENING DEVICE WITH THE SHANK DESIGNED TO BE EXPANDED BY MEANS OF A SEPARATE OR INTEGRAL STEM OR MANDREL, OR BOLT AND EXPANDER. IT IS DESIGNED TO BE INSTALLED OR EXPANDED FROM ONE SIDE ONLY. EXCLUDES NUT, BLIND ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
RIVETS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ANEE | GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 101.0 DEGREES NOMINAL |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| AAZF | SHANK STYLE | SELF-PLUGGING |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AASB | FASTENER LENGTH | 0.295 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| MATT | MATERIAL | ALUMINUM ALLOY 2017 STEM |
| AGAV | END ITEM IDENTIFICATION | W/S: RADAR SET, LIGHTWEIGHT 3D (AN/TPS-59); AIRBORNE MOBILE DIR AIR SPT CTL (2ID),(02MJUL83)(AN/UYQ-3A); HELICOPTER, MH-53E; AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, CARRIER BASED ASW, SH-60F; SUPPORT EQUIPMENT, B-1 AIRCRAFT; MISSILE, AIR INTERCEPT, SIDEWINDER (AIM-9); HELICOPTER, ADVANCE ATTACK, AH-1W; AIRCRAFT, AWACS, E-3A; HELICOPTER, SEARCH AND RESCUE, HH-60H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| FEAT | SPECIAL FEATURES | SLEEVE DYED ORANGE,W/SPECIAL PULLING HEAD |
| MATT | MATERIAL | ALUMINUM ALLOY 5056 BODY |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL OR OXIDE FILM OVERALL |
| CQSX | SHEAR STRENGTH | 230 SINGLE POUNDS PER SQUARE INCH |
| AAZG | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| AAZE | SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |