Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
Code | Company |
---|---|
80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A480 COND. A ASSN STD SINGLE MATERIAL RESPONSE SPRING |
MATT | MATERIAL | STEEL COMP 632 FASTENER |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
THSD | THREAD SERIES DESIGNATOR | UNJF |
CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
CQBC | MINIMUM TENSILE STRENGTH | 63000 POUNDS PER SQUARE INCH |
MATT | MATERIAL | STEEL COMP 631 SPRING OR STEEL COMP 304 SPRING |
AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
AAJD | THREAD CLASS | 3A |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CMLP | THREAD QUANTITY PER INCH | 28 |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASK | HEAD STYLE | FLAT CHAMFER |
AASA | THREAD LENGTH | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
ANEE | GRIP LENGTH | 0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 1.168 INCHES MINIMUM AND 1.188 INCHES MAXIMUM |
AASL | HEAD DIAMETER | 0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
AAUM | LOCKING FEATURE | DETENT BALL GRIP |
AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.073 INCHES MINIMUM FIRST HOLE AND 1.093 INCHES MAXIMUM FIRST HOLE |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |