Part Number
Definition:
A FITTING THAT FORMS AN ANGLE OF LESS THAN 180 DEGREES (3.141 RADIANS) FROM THE STRAIGHT FLOW. ONE END CONNECTION MUST HAVE A SWIVEL FLANGE DESIGNED TO PERMIT AXIAL ROTATION OF THE FITTING, USUALLY FOR THE EASE OF INSTALLATION, PRIOR TO SECURING IT TO A FLANGE OR MOUNTING PAD. THE OTHER END CONNECTION IS DESIGNED TO GRIP THE HOSE DIRECTLY, EITHER EXTERNALLY, INTERNALLY, OR BOTH. IT INCLUDES ITEMS DESIGNED TO ACCOMMODATE A SWIVEL FLANGE.
CAGE Information
| Code | Company |
|---|---|
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | ANODIZE BODY |
| SFTT | SURFACE TREATMENT | ANODIZE BODY |
| AHSJ | LEG LENGTH | 3.016 INCHES NOMINAL 2ND END |
| CWDF | FLANGE FACE DESIGN | RAISED SWIVEL 1ST END |
| MATT | MATERIAL | STEEL FLANGE |
| CWDH | RAISED FACE NOMINAL HEIGHT | 0.020 INCHES 1ST END |
| CWDZ | NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED | 1.234 INCHES 2ND END |
| AHNC | CONNECTION STYLE | GRIPPING NIPPLE (NOSE) 2ND END |
| CWCK | NOMINAL THICKNESS | 0.234 INCHES 1ST END |
| CWDW | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.875 INCHES 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH 3RD RESPONSE |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL HOSE GRIPPING 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FLANGE |
| AKGG | NOMINAL LENGTH | 1.750 INCHES 1ST END |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| TMQY | FURNISHED ITEMS AND QUANTITY | 1 HOSE COUPLING NUT |
| ARKN | FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END |
| CWDL | RAISED FACE NOMINAL DIAMETER | 1.500 INCHES 1ST END |
| AKGF | NOMINAL WIDTH | 1.750 INCHES 1ST END |
| AWLS | CONNECTION TYPE | FLANGE 1ST END |
| AHSJ | LEG LENGTH | 1.219 INCHES NOMINAL 1ST END |
| CWCY | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.312 INCHES 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 50.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.205 INCHES 1ST END |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY FLANGE MATERIAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL 2ND RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM FLANGE |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| CWDC | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.312 INCHES 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH 2ND RESPONSE |
| MATT | MATERIAL | ALUMINUM ALLOY BODY |
| MEDA | MEDIA FOR WHICH DESIGNED | OIL 1ST RESPONSE |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID 3RD RESPONSE |