Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 76761 | C. E. NIEHOFF & CO. |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 200.0 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 170.0 |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.281 INCHES MINIMUM AND 7.332 INCHES MAXIMUM |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.471 INCHES MINIMUM AND 8.548 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | 2320-01-380-8604; WEAPON SYSTEM E/I TRUCK, VEHICLE SYSTEM, 1 1/4-TON (HMMWV) |
| CFHL | THREAD CLASS | 3A |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR | KEYWAY WIDTH | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AFYS | KEYWAY LENGTH | 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |