Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 78570 | SMITHS TUBULAR SYSTEMS-LACONIA INC. |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | ERR-070 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY SPECIAL FEATURES |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | ERR-070 |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL MIL-H-27267,SIZE 16Z SPECIFICATION |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| FEAT | SPECIAL FEATURES | BEND RADIUS MAY BE REDUCED TO 4.5 IN. IF WP DOES NOT EXCEED 500 PSI,INTERNAL SUPPORT IS A FLAT HELICALLY WOUND CORROSION RESISTANT STEEL WIRE COIL,NUTS DRILLED FOR LOCKWIRE; ADDITIONAL MEDIA FOR WHICH DESIGNED: OXIDIZERS, SOLVENT |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRSM | VACUUM IN TORR | 50.8 |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| CRXX | MEASURING METHOD AND LENGTH | 36.350 INCHES NOMINAL WORKING |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
| ABKV | OUTSIDE DIAMETER | 1.109 INCHES NOMINAL |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| MEDA | MEDIA FOR WHICH DESIGNED | ETHYLENE GLYCOL SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AAJD | THREAD CLASS | 3B 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 CLASS |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNJ 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND INTERNAL SUPPORT |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |