Part Number
Part Number:
NSN:
NIIN:
Item Name:
CAPACITOR , FIXED , MICA DIELECTRIC
Definition:
A CAPACITOR, WHOSE CAPACITANCE VALUE CANNOT BE ADJUSTED OR VARIED, HAVING NATURAL SHEET MICA OR RECONSTITUTED FLAKED MICA FORMED INTO SHEETS AS THE DIELECTRIC MATERIAL. IT MAY BE A SINGLE UNIT, OR CONSIST OF TWO OR MORE FIXED UNITS WHICH CANNOT BE SEPARATED.
CAGE Information
| Code | Company |
|---|---|
| 82187 | NATIONAL WEATHER SERVICE DBA NATIONA |
Federal Supply Class
Title
CAPACITORS
Inclusions:
INCLUDES INTERFERENCE FILTER CAPACITORS; CAPACITOR MOUNTING HARDWARE.
Exclusions:
EXCLUDES SEMICONDUCTOR DEVICES AND ASSOCIATED HARDWARE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRTP | TOLERANCE RANGE PER SECTION | -5.00/+5.00 PERCENT SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.770 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| AAQL | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AEBT | TERMINAL DIAMETER | 0.038 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.770 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-C-5/5G GOVERNMENT SPECIFICATION |
| ABJT | TERMINAL LENGTH | 1.120 INCHES MINIMUM |
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+100.0 SINGLE SECTION |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBQ | CAPACITANCE VALUE PER SECTION | 10000.000 PICOFARADS SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| CWJK | CASE MATERIAL | PLASTIC |
| TEST | TEST DATA DOCUMENT | 81349-MIL-C-5 SPECIFICATION |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 300.0 DC SINGLE SECTION |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| ADAT | BODY WIDTH | 0.280 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |