Part Number
Part Number:
NSN:
NIIN:
Item Name:
COUPLING , CLAMP , GROOVED
Definition:
A METAL LOOP HAVING EITHER A V OR U CROSS SECTION OR CHANNELLED SEGMENT(S). IT MAY BE ATTACHED TO A FLAT BAND. IT IS DESIGNED TO CREATE A FLUID TIGHT JOINT AND/OR CONNECT PIPE, TUBING, TANK COVER(S), DUCT(S) AND THE LIKE, BY MATING WITH FLANGED OR BEADED FERRULE(S), FLARED, OR BEADED ENDS. IT MAY OR MAY NOT HAVE A SEALING INNER LINER. A LATCH OR LATCHES OF THE QUICK COUPLING TYPE, NUT OR BOLT TYPE, OR THREADED TRUNNION TYPE IS (ARE) USED TO LOCK AND ADJUST THE BAND. EXCLUDES COUPLING, CLAMP, PIPE AND RING, LOCKING, METAL DRUM COVER.
CAGE Information
| Code | Company |
|---|---|
| 94581 | V I J CORPORATION DBA NUCO |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ALDW | SEALING INNER LINER | NOT INCLUDED |
| ALEC | ROOT WIDTH | 0.202 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| HGTH | HEIGHT | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| AARX | INSIDE DIAMETER | 2.300 INCHES MINIMUM AND 2.320 INCHES MAXIMUM |
| ALDS | NUT TYPE | PLAIN HEXAGON |
| ANNQ | MATERIAL AND LOCATION | STEEL MIL-S-18732 BOLT |
| AKZZ | INCLUDED ANGLE IN DEG | 40.0 |
| ASXG | DRILLED LOCKWIRE HOLE | INCLUDED |
| ALEE | BAND WIDTH | 0.750 INCHES NOMINAL |
| AGPR | LATCH STYLE | SINGLE |
| ANNQ | MATERIAL AND LOCATION | STEEL MIL-S-5059 1/2 HARD BAND |
| AGCS | MAXIMUM LOAD RATING | NOT RATED |
| ADTJ | RETAINER THICKNESS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ALDT | SEGMENT QUANTITY | 3 |
| SHPE | SHAPE | ROUND |
| ALEB | RETAINER WIDTH | 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| ABJH | TEMP RATING | NOT RATED |
| ANNQ | MATERIAL AND LOCATION | STEEL MIL-S-5059 ANNEALED SEGMENT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | GROOVED RETAINER |
| ANNQ | MATERIAL AND LOCATION | STEEL, CORROSION RESISTING NUT |
| ALED | BAND THICKNESS | 0.025 INCHES NOMINAL |