Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 0.8 MICROMETERS THREADS |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| ANEE | GRIP LENGTH | 13.80 MILLIMETERS MINIMUM AND 14.20 MILLIMETERS MAXIMUM |
| AASK | HEAD STYLE | UNDERCUT HEXAGON |
| CQBC | MINIMUM TENSILE STRENGTH | 1100 MEGAPASCALS |
| AASU | HEAD HEIGHT | 4.2 MILLIMETERS MINIMUM AND 4.5 MILLIMETERS MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 8.0 MILLIMETERS |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AATB | WIDTH BETWEEN FLATS | 12.73 MILLIMETERS MINIMUM AND 13.00 MILLIMETERS MAXIMUM |
| AASA | THREAD LENGTH | 11.0 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AAUR | GRIP DIAMETER | 7.9620 MILLIMETERS MINIMUM AND 7.9870 MILLIMETERS MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | MJ |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NA0036 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQQR | THREAD PITCH IN MILLIMETERS | 1.0 |
| CSYM | SURFACE FINISH | 0.8 MICROMETERS BEARING SURFACE OF HEAD |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 25.20 MILLIMETERS MINIMUM AND 25.80 MILLIMETERS MAXIMUM |
| CSYM | SURFACE FINISH | 0.8 MICROMETERS GRIP |