Part Number
Part Number:
NSN:
NIIN:
Item Name:
BOLT , CLOSE TOLERANCE
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code |
Company |
| 80205 |
NATIONAL AEROSPACE STANDARDS COMMITT |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
BOLT, CLOSE TOLERANCE, HEXAGON HEAD, ALLOY STEEL, 1100 MPA, METRIC |
| AASU |
HEAD HEIGHT |
4.7 MILLIMETERS MINIMUM AND 5.0 MILLIMETERS MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
10.0 MILLIMETERS |
| MATT |
MATERIAL |
STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| ANEE |
GRIP LENGTH |
20.0 MILLIMETERS NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
1100 MEGAPASCALS |
| AATB |
WIDTH BETWEEN FLATS |
16.7 MILLIMETERS MINIMUM AND 17.0 MILLIMETERS MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASA |
THREAD LENGTH |
14.5 MILLIMETERS NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
MJ |
| AASK |
HEAD STYLE |
HEXAGON |
| AASB |
FASTENER LENGTH |
34.5 MILLIMETERS NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUR |
GRIP DIAMETER |
10.9 MILLIMETERS MINIMUM AND 11.0 MILLIMETERS MAXIMUM |
| CQQR |
THREAD PITCH IN MILLIMETERS |
1.3 |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
Similar Parts