Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW , CLOSE TOLERANCE
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code |
Company |
| 80205 |
NATIONAL AEROSPACE STANDARDS COMMITT |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| AAUR |
GRIP DIAMETER |
0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AASB |
FASTENER LENGTH |
1.548 INCHES MINIMUM AND 1.578 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| AASA |
THREAD LENGTH |
0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ANEE |
GRIP LENGTH |
1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
| MATT |
MATERIAL |
TITANIUM ALLOY UNS R54520 OVERALL |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.066 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AASL |
HEAD DIAMETER |
0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.419 INCHES MINIMUM FIRST HOLE AND 1.469 INCHES MAXIMUM FIRST HOLE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1155 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
Similar Parts