Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.338 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC LOCKING FEATURE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 0.448 INCHES MINIMUM AND 0.478 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER AND CHROMATE FASTENER |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AAUR | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| MATT | MATERIAL | STEEL COMP E4340 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 8740 FASTENER |
| AAUM | LOCKING FEATURE | PELLET THREADS OR PATCH THREADS OR STRIP THREADS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER |
| AASA | THREAD LENGTH | 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1162 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |