Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 80205 |
NATIONAL AEROSPACE STANDARDS COMMITT |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1197 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
-QQ-A-250/8,H36 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR -QQ-A-250/8,H34 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR -QQ-A-250/8,H38 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 OVERALL |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| ABNM |
THICKNESS |
0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
1.307 INCHES MINIMUM AND 1.332 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.755 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
Similar Parts