Part Number
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| ADEA | NUT HEIGHT | 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.046 INCHES NOMINAL |
| ASDB | WIDTH ACROSS FLATS | 0.863 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CSXL | BEARING SURFACE FINISH | 250.0 MICROINCHES |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 COND C1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5000 COND C4 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| ACTA | NUT STYLE | HEXAGON |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 4340 OVERALL |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRSQ | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |