Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
CAGE Information
| Code |
Company |
| 80205 |
NATIONAL AEROSPACE STANDARDS COMMITT |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
-1L-R-7362 TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
-1L-R-7362 TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1515 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| MATT |
MATERIAL |
RUBBER SYNTHETIC OVERALL |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| AAUB |
HOLE DIAMETER |
0.169 INCHES MINIMUM AND 0.179 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
1500 POUNDS PER SQUARE INCH |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| CQFM |
HARDNESS RATING |
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM |
| ABNM |
THICKNESS |
0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
0.370 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
Similar Parts