Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, NO 0 (0.060 IN./1.5 MM) OR LARGER, DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR AN INSERTED DRIVER OR BOTH (EXCLUDING INTERNAL SOCKET OR INTERNAL MULTIPLE SPLINE TYPES), IN SIZES BELOW NO. 10 (0.190 IN./5 MM). NO. 10 AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET OR INTERNAL MULTIPLE SPLINE TYPES), BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. EXCLUDES BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; AND SCREW, ASSEMBLED WASHER. SEE ALSO, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; AND SCREW, CAP SOCKET HEAD.
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AASA | THREAD LENGTH | 0.075 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 309 OR STEEL COMP 384 OR STEEL COMP 348 OR STEEL COMP 347 OR STEEL COMP 321 OR STEEL COMP 316L OR STEEL COMP 310S OR STEEL COMP 309S OR STEEL COMP 308 OR STEEL COMP 304 OR STEEL COMP 303SE OR STEEL COMP 303 OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 305 OR STEEL COMP 302B OR STEEL COMP 304L OR STEEL COMP 316 OR STEEL COMP 314 OR STEEL COMP 317 OR STEEL COMP 310 OR STEEL COMP 385 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CYAV | LOCKING FEATURE MATERIAL | PLASTIC POLYAMIDE |
| AASB | FASTENER LENGTH | 0.125 INCHES NOMINAL |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 3 STYLE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AHYM | NOMINAL THREAD DIAMETER | 0.060 INCHES |
| AAJD | THREAD CLASS | 2A |
| AAUM | LOCKING FEATURE | PATCH OR PELLET OR STRIP |
| CMLP | THREAD QUANTITY PER INCH | 80 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| AASL | HEAD DIAMETER | 0.096 INCHES MINIMUM AND 0.119 INCHES MAXIMUM |