Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| AASL | HEAD DIAMETER | 0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASB | FASTENER LENGTH | 1.863 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | A-10 AIRCRAFT |
| ANEE | GRIP LENGTH | 1.438 INCHES NOMINAL |