Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
Code | Company |
---|---|
80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
ABQZ | INTERNAL DRIVE STYLE | SLOT |
THSD | THREAD SERIES DESIGNATOR | UNJF |
CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
CQBC | MINIMUM TENSILE STRENGTH | 63000 POUNDS PER SQUARE INCH |
AASU | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.698 INCHES MINIMUM FIRST HOLE AND 4.718 INCHES MAXIMUM FIRST HOLE |
AAJD | THREAD CLASS | 3A |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
CMLP | THREAD QUANTITY PER INCH | 28 |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASK | HEAD STYLE | CROWNED HEXAGON |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
AASB | FASTENER LENGTH | 4.793 INCHES MINIMUM AND 4.813 INCHES MAXIMUM |
AASA | THREAD LENGTH | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
AATB | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
ANEE | GRIP LENGTH | 4.375 INCHES MINIMUM AND 4.391 INCHES MAXIMUM |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
AAUM | LOCKING FEATURE | DETENT BALL GRIP |
AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |