Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , LOCK
Definition:
A WASHER WHICH IS USUALLY ROUND WITH A CENTRALLY LOCATED HOLE. ITS EDGES AND TWO BEARING SURFACES ARE SO DESIGNED THAT APPLIED PRESSURE BRINGS INTO PLAY THE SPRING TENSION AND/OR FRICTIONAL LOCKING PRINCIPLE WHICH MATERIALLY RESISTS ANY TENDENCY TOWARD TURNING. IT MAY BE MADE OF ONE OR TWO PIECES
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| STYL | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| ABPX | MATERIAL THICKNESS | 0.158 INCHES MINIMUM |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | C CLASS AND 2 STYLE |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER,LOCK-SPRING,HELICAL,REGULAR(MEDIUM) SERIES |
| ABKV | OUTSIDE DIAMETER | 1.073 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| CQFM | HARDNESS RATING | 35.00 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.628 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | SIZE 5/8 (0.625) NOMINAL |