Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 3.685 INCHES MINIMUM AND 3.715 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.925 INCHES MINIMUM AND 0.975 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.560 INCHES MINIMUM AND 0.561 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.562 INCHES |
| SFTT | SURFACE TREATMENT | CHROMATE OVERALL AND CADMIUM OVERALL |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AATC | EXTENDED WASHER DIAMETER | 1.037 INCHES MINIMUM AND 1.047 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.071 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |