Part Number
Part Number:
NSN:
NIIN:
Item Name:
RIVET , BLIND
Definition:
AN ITEM CONSISTING OF TWO OR MORE OF THE FOLLOWING COMPONENTS: STEM, RIVET BODY, SLEEVE, EXPANDER, BOLT, AND COLLAR. IT IS A HEADED FASTENING DEVICE WITH THE SHANK DESIGNED TO BE EXPANDED BY MEANS OF A SEPARATE OR INTEGRAL STEM OR MANDREL, OR BOLT AND EXPANDER. IT IS DESIGNED TO BE INSTALLED OR EXPANDED FROM ONE SIDE ONLY. EXCLUDES NUT, BLIND ASSEMBLY.
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
RIVETS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | CADMIUM SLEEVE AND CHROMATE SLEEVE |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| AASK | HEAD STYLE | SMALL PAN |
| AASU | HEAD HEIGHT | 0.062 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| CQBC | MINIMUM TENSILE STRENGTH | 112000 POUNDS PER SQUARE INCH |
| AAZF | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| CQFM | HARDNESS RATING | 48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE SLEEVE OR 66 FED STD 3RD MATERIAL RESPONSE SLEEVE OR ASTM A547 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE SLEEVE |
| SFTT | SURFACE TREATMENT | CADMIUM STEM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM OR ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| AAZE | SHANK DIAMETER | 0.162 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8740 STEM |
| CQSX | SHEAR STRENGTH | 2340 SINGLE POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL COMP 4027 SLEEVE OR STEEL COMP 4037 SLEEVE OR STEEL COMP 4130 SLEEVE |
| AASB | FASTENER LENGTH | 0.655 INCHES NOMINAL |
| AAZG | HEAD MAJOR DIAMETER | 0.250 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.469 INCHES MINIMUM AND 0.532 INCHES MAXIMUM |