Part Number
Part Number:
NSN:
NIIN:
Item Name:
COUPLING , CLAMP , GROOVED
Definition:
A METAL LOOP HAVING EITHER A V OR U CROSS SECTION OR CHANNELLED SEGMENT(S). IT MAY BE ATTACHED TO A FLAT BAND. IT IS DESIGNED TO CREATE A FLUID TIGHT JOINT AND/OR CONNECT PIPE, TUBING, TANK COVER(S), DUCT(S) AND THE LIKE, BY MATING WITH FLANGED OR BEADED FERRULE(S), FLARED, OR BEADED ENDS. IT MAY OR MAY NOT HAVE A SEALING INNER LINER. A LATCH OR LATCHES OF THE QUICK COUPLING TYPE, NUT OR BOLT TYPE, OR THREADED TRUNNION TYPE IS (ARE) USED TO LOCK AND ADJUST THE BAND. EXCLUDES COUPLING, CLAMP, PIPE AND RING, LOCKING, METAL DRUM COVER.
CAGE Information
| Code | Company |
|---|---|
| 8W928 | EATON CORPORATION DBA EATON QUIP DIV |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ALEC | ROOT WIDTH | 0.156 INCHES NOMINAL |
| ALDW | SEALING INNER LINER | NOT INCLUDED |
| ALDS | NUT TYPE | PLAIN CASTELLATED HEXAGON |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, TYPE 301 TRUNNION OR STEEL, MIL-S-5059, COMP 302 TRUNNION |
| AARX | INSIDE DIAMETER | 7.394 INCHES NOMINAL |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, TYPE 302, 1/4 HARD STRAP |
| HGTH | HEIGHT | 0.218 INCHES NOMINAL |
| AKZZ | INCLUDED ANGLE IN DEG | 40.0 |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-18732, TYPE 431 T BOLT |
| ALEE | BAND WIDTH | 0.625 INCHES NOMINAL |
| ALEB | RETAINER WIDTH | 0.470 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| ANNR | SURFACE TREATMENT AND LOCATION | PAINTED SEGMENT |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT |
| AGPR | LATCH STYLE | SINGLE |
| AGCS | MAXIMUM LOAD RATING | NOT RATED |
| ALDT | SEGMENT QUANTITY | 2 |
| ANNR | SURFACE TREATMENT AND LOCATION | SILVER PLATED NUT |
| SHPE | SHAPE | ROUND |
| ADTJ | RETAINER THICKNESS | 0.032 INCHES NOMINAL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | GROOVED RETAINER |
| ANNR | SURFACE TREATMENT AND LOCATION | PAINTED STRAP |
| ANNQ | MATERIAL AND LOCATION | STEEL, CORROSION RESISTING NUT |
| ANNR | SURFACE TREATMENT AND LOCATION | PAINTED TRUNNION |
| ALED | BAND THICKNESS | 0.025 INCHES NOMINAL |
| ANNQ | MATERIAL AND LOCATION | STEEL, MIL-S-5059, TYPE 302, 1/4 HARD RETAINER |