Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 73138 | BI TECHNOLOGIES CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABPC | UNDERCUT WIDTH | 0.06200 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.62400 INCHES MINIMUM AND 0.62500 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.250 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BALL |
| ABNB | FIRST FLAT LENGTH | 0.560 INCHES NOMINAL |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AEFM | MAXIMUM STOP TORQUE | 100.00 INCH-OUNCES |
| ABHP | OVERALL LENGTH | 2.239 INCHES MINIMUM AND 2.269 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| ABXF | SHAFT LENGTH | 0.645 INCHES MINIMUM AND 0.675 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, V FLATTED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3620.0 MAXIMUM |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3620.0 MAXIMUM |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| ADAQ | BODY LENGTH | 1.594 INCHES NOMINAL |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEFY | SHAFT END PLAY | 0.00200 INCHES |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 SINGLE SECTION |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AECZ | MOUNTING LIP DIAMETER | 0.87500 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 |
| ADAV | OVERALL DIAMETER | 1.062 INCHES NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| ABPA | UNDERCUT DIAMETER | 0.750 INCHES NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |