Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 71450 | CTS CORP |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| ABWV | SHAFT DIAMETER | 0.202 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AAPN | SECTION QUANTITY | 2 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 40.0 OHMS C AND BETTER FINISH |
| ADAV | OVERALL DIAMETER | 1.633 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AEFN | NONTURN DEVICE LOCATION | AT 3 OCLOCK |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| AEFP | NONTURN DEVICE RADIUS | 0.516 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 ALL SECTIONS |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING W/SHAFT SEAL |
| ABPM | BODY DIAMETER | 1.250 INCHES MINIMUM AND 1.297 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| ABXF | SHAFT LENGTH | 0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A ALL SECTIONS |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.0 OHMS C AND BETTER INDUSTRIAL CLEARS |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |