Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 79568 | WHITTET-HIGGINS COMPANY |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| ABPH | SMALL END DIAMETER | 0.730 INCHES MINIMUM AND 0.756 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL OVERALL |
| ACTD | NUT DIAMETER | 0.792 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ADBH | DRIVE POINT WIDTH | 0.125 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ADBG | NUT THICKNESS | 0.205 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |