Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
CAGE Information
| Code | Company |
|---|---|
| 00141 | PRECISION INDUSTRIAL COMPONENTS LLC |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE HUB |
| SFTT | SURFACE TREATMENT | PASSIVATE HUB |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE HUB |
| AJLA | TEETH QUANTITY | 160 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE HUB |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.250 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.248 INCHES FIRST END |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| ABSX | ATTACHMENT METHOD | CLAMP |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| BDZQ | BACKLASH DESIGNATION | GRADE D |
| CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END |
| SFTT | SURFACE TREATMENT | ANODIZE FIRST GEAR |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.024 INCHES |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| SFTT | SURFACE TREATMENT | ANODIZE SECOND GEAR |
| MATT | MATERIAL | STEEL COMP 303 HUB |
| CWRS | BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| AGJS | PITCH DIAMETER | 1.9993 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM |
| CWNH | TOOTH FORM | STANDARD |