Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , RECESSED
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 22888 | FMC CORP |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKW | OVERALL HEIGHT | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | OD CHAMFERED 0.016 IN. BY 45 DEG |
| MATT | MATERIAL | COPPER ALLOY OVERALL |
| HEAT | HEAT TREATMENT | ANNEALED |
| ABKV | OUTSIDE DIAMETER | 1.094 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | RECESS |
| CSTM | RECESS ANGLE | 90.0 DEGREES NOMINAL |
| ABMD | RECESS DIAMETER | 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM |