Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
CAGE Information
| Code | Company |
|---|---|
| 00141 | PRECISION INDUSTRIAL COMPONENTS LLC |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWWS | FIRST STEP NOMINAL LENGTH | 0.031 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.688 INCHES |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWWN | END NOMINAL DIAMETER | 0.310 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWWH | END NOMINAL LENGTH | 0.250 INCHES FIRST END |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| AJLA | TEETH QUANTITY | 170 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| AGJS | PITCH DIAMETER | 2.6553 INCHES MINIMUM AND 2.6563 INCHES MAXIMUM |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| CWNH | TOOTH FORM | STANDARD |