Part Number
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 33823 | ADAMS INDUSTRIES INC A SUB OF BANNER |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGGP | DRILLED HOLE DIAMETER | 0.060 INCHES NOMINAL |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
| ADEA | NUT HEIGHT | 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | NOT RATED |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION H |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL OVERALL |
| ACTA | NUT STYLE | HEXAGON |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 10 |
| BZRR | THREAD SERIES | UNC |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |
| AAJD | THREAD CLASS | 2B |