Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
CAGE Information
| Code | Company |
|---|---|
| 00141 | PRECISION INDUSTRIAL COMPONENTS LLC |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE HUB |
| SFTT | SURFACE TREATMENT | ANODIZE BODY |
| AJLA | TEETH QUANTITY | 100 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.312 INCHES FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.234 INCHES SECOND END |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE HUB |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303 FED SPEC SINGLE MATERIAL RESPONSE HUB |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, HUBLESS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
| CWTX | HUB NOMINAL DIAMETER | 0.188 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.188 INCHES SECOND END |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWFR | NOMINAL OVERALL LENGTH | 0.6090 INCHES |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BODY |
| CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| AGJS | PITCH DIAMETER | 1.3888 INCHES NOMINAL |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.4170 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 303 HUB |
| CWTR | HUB STYLE DESIGNATOR | THREADED SECOND END |
| CWNH | TOOTH FORM | STANDARD |