Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 64959 |
AMERICAN TELEPHONE AND TELEGRAPH CO |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
1.750 INCHES |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
1.750 INCHES |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| MATT |
MATERIAL |
PLASTIC PHENOLIC BOARD AND PAPER BOARD |
| ABGT |
BOARD THICKNESS |
0.063 INCHES |
| ABCS |
TERMINAL ROW QUANTITY |
2 |
| ABGN |
BOARD OVERALL LENGTH |
3.375 INCHES |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.064 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
L-P-513,TYPE PBE-P FED SPEC SINGLE MATERIAL RESPONSE BOARD |
| AAQL |
BODY STYLE |
STRIP TYPE |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| ABCU |
DISTANCE BETWEEN TERMINAL ROW CENTERS |
1.750 INCHES |
| ABDB |
TERMINAL FACILITY QUANTITY |
12 |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.188 INCHES |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.156 INCHES |
| AAMA |
MOUNTING HOLE DIAMETER |
0.125 INCHES |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.438 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
2.125 INCHES |
Similar Parts