Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
Code |
Company |
06KW9 |
LUCENT TECHNOLOGIES INC DBA FEDERAL |
Characteristics (Decoded)
MRC |
Requirements Statement |
Clear Text Reply |
ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
MATT |
MATERIAL |
PLASTIC BOARD |
AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
ABGP |
BOARD OVERALL WIDTH |
2.750 INCHES |
ABGT |
BOARD THICKNESS |
0.188 INCHES |
FEAT |
SPECIAL FEATURES |
FUNGUS AND MOISTURE RESISTANT |
ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.219 INCHES |
CRZR |
FEEDTHRU TERMINAL QUANTITY |
8 SINGLE COMBINATION |
CQCW |
FEEDTHRU CONNECTION END TYPE |
F6 BOTH ENDS SINGLE COMBINATION |
AAMA |
MOUNTING HOLE DIAMETER |
0.161 INCHES |
CWLG |
TERMINAL PATTERN ARRANGEMENT |
MULTI-ROW |
MARK |
SPECIAL MARKINGS |
T,EXT,RT,LINE,A R ON BOTH SIDES |
ABCS |
TERMINAL ROW QUANTITY |
4 |
AAQL |
BODY STYLE |
BLOCK TYPE |
ABGN |
BOARD OVERALL LENGTH |
2.938 INCHES |
ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
2.000 INCHES |
CWLN |
TERMINAL DESIGN |
VERTICAL FEEDTHRU |
ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.500 INCHES |
ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.375 INCHES |
Similar Parts