Part Number
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 96195 | UNISTRUT DIVERSIFIED PRODUCTS CO WAY |
Federal Supply Class
Title
STRUCTURAL SHAPES
Inclusions:
INCLUDES BAR SIZE SHAPES (UNDER 3 INCHES); METAL PILES AND PILING; ANGLES; CHANNELS; TEES; ZEES.
Exclusions:
EXCLUDES PLATE, SHEET AND STRIP MATERIALS (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABRY | LENGTH | 20.000 FEET NOMINAL |
| ABMK | OVERALL WIDTH | 1.625 INCHES NOMINAL |
| CTBR | LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| MATL | MATERIAL | STEEL |
| ADXK | RIGHT SIDE FLANGE HEIGHT | 6.500 INCHES NOMINAL |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| BPXH | RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 3.250 INCHES NOMINAL |
| AGTA | BASIC SHAPE STYLE | H SHAPE |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| CWKK | RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| ADXJ | LEFT SIDE FLANGE HEIGHT | 6.500 INCHES NOMINAL |
| BPXF | LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 3.250 INCHES NOMINAL |
| ADXM | RIGHT SIDE FLANGE THICKNESS | 0.105 INCHES NOMINAL |
| BPXN | WEB FLANGE THICKNESS | 0.105 INCHES NOMINAL |
| BRFD | WEIGHT PER UNIT MEASURE | 0.083 POUNDS PER LINEAR FOOT |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 3.250 INCHES NOMINAL |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 3.250 INCHES NOMINAL |
| AARN | FABRICATION METHOD | ROLLED |
| ADXL | LEFT SIDE FLANGE THICKNESS | 0.105 INCHES NOMINAL |