Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 04729 | UNICORP |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASK | HEAD STYLE | PAN NO. 2 |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | 0.1670 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | 0.033 INCHES MINIMUM AND 0.049 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 8740 OVERALL |
| AASB | FASTENER LENGTH | 0.732 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.502 INCHES MINIMUM AND 0.542 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| AAWC | FIRST DIAMETER FROM HEAD | 0.076 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |