Part Number
Definition:
A THIN FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID OR LAMINATED CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE AND HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. ITEMS WITH EITHER (1) A SOLID (NOT LAMINATED) CROSS-SECTION, OR (2) A NON-SEPARABLE LAMINATED CROSS-SECTION WITH ONE HOLE CENTRALLY LOCATED, MUST HAVE A THICKNESS LESS THAN 0.006 INCH (0.152 MM) FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS, AND LESS THAN 0.016 INCH (0.406 MM) FOR ITEMS 1/4 INCH (6.35 MM) OR MORE OUTSIDE DIAMETER, OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS. FOR ITEMS WITH THICKNESS GREATER THAN THOSE INDICATED ABOVE, SEE SPACER, PLATE; WASHER, FLAT AND SPACER, RING. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. SEE ALSO SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; AND BEARING, WASHER, THRUST.
CAGE Information
| Code | Company |
|---|---|
| 0B201 | CLARK AND ASSOCIATES INC |
Federal Supply Class
Title
BUSHINGS, RINGS, SHIMS, AND SPAC
Inclusions:
INCLUDES EXTERNALLY THREADED RINGS; KEYED AND SERRATED LOCK RINGS; DEE RINGS; INSTRUMENT RETAINING RINGS; SHIM SETS AND ASSORTMENTS; PLATE SPACERS; RING SPACERS; SLEEVE SPACERS; STEPPED SPACERS; SPACER SETS AND ASSORTMENTS; SLEEVE BUSHINGS; MACHINE THREADED BUSHINGS; MACHINE THREADED PLUGS.
Exclusions:
EXCLUDES SLEEVE BEARINGS (FSC 3120); PIPE THREADED PLUGS (FSC 4730); PISTON RINGS (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, AND 4820); RETAINING RINGS (FSC 5325); SHIM STOCK (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADUV | BEARING SURFACE WIDTH | 0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| CQCF | CONSTRUCTION | ONE-PIECE |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.800 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | ROTARY ACTUATOR/INSTALLATION,F-16C/D COMMON |
| ABMK | OVERALL WIDTH | 0.830 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ONE HOLE 0.240 IN. MIN AND 0.260 IN. MAX ON ONE END AND ONE HOLE 0.302 IN. MIN AND 0.322 IN. MAX ON OPPOSITE END; TAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 0.830 IN. MIN AND 0.890 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGREE RADIUS |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| ABHP | OVERALL LENGTH | 1.420 INCHES MINIMUM AND 1.480 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| ADUM | OVERALL THICKNESS | 0.006 INCHES MINIMUM AND 0.010 INCHES MAXIMUM |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CHROMATE |