Part Number
Part Number:
NSN:
NIIN:
Item Name:
BEAM , STRUCTURAL
Definition:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
CAGE Information
| Code | Company |
|---|---|
| 06012 | TRANSTAR METALS CORP |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.250 INCHES NOMINAL |
| BPXL | FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.250 INCHES NOMINAL |
| ABRY | LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| ADXR | LEFT SIDE TOP FLANGE THICKNESS | 0.190 INCHES NOMINAL |
| BPXJ | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.250 INCHES NOMINAL |
| AARN | FABRICATION METHOD | EXTRUDED |
| AGTA | BASIC SHAPE STYLE | T SHAPE |
| AJJP | LEG THICKNESS | 0.200 INCHES NOMINAL |
| HEAT | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| BQJG | TOP FLANGE WIDTH | 2.600 INCHES NOMINAL |
| CSMZ | LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| CRZC | RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.360 INCHES NOMINAL |
| BPXG | RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.300 INCHES NOMINAL |
| CNQL | THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | T6 TEMPER |
| BRFD | WEIGHT PER UNIT MEASURE | 0.905 POUNDS PER LINEAR FOOT |
| CNBD | FIRST TIP INNER RADIUS | 0.032 INCHES NOMINAL |
| ADXS | RIGHT SIDE TOP FLANGE THICKNESS | 0.190 INCHES NOMINAL |
| CNBJ | FIRST TIP OUTER RADIUS | 0.032 INCHES NOMINAL |
| CNQJ | SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| MATL | MATERIAL | ALUMINUM ALLOY, QQ-A-200/11 |
| BPXD | LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.300 INCHES NOMINAL |
| CMZY | FIRST TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |