Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 27624 | PAUL R. BRILES INC. DBA PB FASTENERS |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ANEE | GRIP LENGTH | 6.625 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 6.625 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| AASU | HEAD HEIGHT | 0.257 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL AND CADMIUM OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 6.979 INCHES MINIMUM FIRST HOLE AND 7.011 INCHES MAXIMUM FIRST HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CQBC | MINIMUM TENSILE STRENGTH | 156000 POUNDS PER SQUARE INCH |
| AATB | WIDTH BETWEEN FLATS | 0.678 INCHES MINIMUM AND 0.689 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 7.104 INCHES MINIMUM AND 7.151 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.438 INCHES |
| AASK | HEAD STYLE | DOUBLE HEXAGON |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 20 |