Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW , CLOSE TOLERANCE
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code |
Company |
| 27624 |
PAUL R. BRILES INC. DBA PB FASTENERS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ANEE |
GRIP LENGTH |
1.187 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
1.557 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.370 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.250 INCHES |
| AASL |
HEAD DIAMETER |
0.587 INCHES NOMINAL |
| ABQJ |
POINT STYLE |
FLAT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
26 |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AAUR |
GRIP DIAMETER |
0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP H11 OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
Similar Parts