Part Number
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
CAGE Information
| Code | Company |
|---|---|
| 27624 | PAUL R. BRILES INC. DBA PB FASTENERS |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| AASK | HEAD STYLE | PAN NO. 2 |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| AASU | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.782 INCHES MINIMUM FIRST HOLE AND 0.792 INCHES MAXIMUM FIRST HOLE |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASB | FASTENER LENGTH | 0.888 INCHES MINIMUM AND 0.918 INCHES MAXIMUM |