Part Number
Definition:
A HIGH STRENGTH, 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH EXTERNALLY THREADED FASTENER DESIGNED FOR USE IN APPLICATIONS INVOLVING GREAT SHEAR STRESS. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. THE UNTHREADED PORTION IS OF SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE BOLT, MACHINE AND BOLT, CLEVIS.
CAGE Information
| Code | Company |
|---|---|
| 27624 | PAUL R. BRILES INC. DBA PB FASTENERS |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| AATD | EXTENDED WASHER THICKNESS | 0.123 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AASA | THREAD LENGTH | 0.761 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| AATC | EXTENDED WASHER DIAMETER | 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.496 INCHES MINIMUM AND 2.526 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM |
| AAWU | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASU | HEAD HEIGHT | 0.494 INCHES MINIMUM AND 0.514 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AATB | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |