Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 1VE94 | TECHNIPLAS INC DBA TECHNIPLAS |
Federal Supply Class
Title
ENGINE AIR AND OIL FILTERS, STRA
Inclusions:
INCLUDES COMPONENTS FOR ALL ENGINES EXCEPT AIRCRAFT AND GUIDED MISSILE PRIME MOVING.
Exclusions:
EXCLUDES AIR AND OIL FILTERS (FSC 4310, 4330), STRAINERS (FSC 4730) AND CLEANERS (FSC 4310) NOT SPECIFICALLY DESIGNED FOR USE WITH ENGINES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| MATT | MATERIAL | RUBBER SEAL |
| ABPM | BODY DIAMETER | 3.790 INCHES MINIMUM AND 3.920 INCHES MAXIMUM |
| ADNP | DROP PRESSURE | 2.5 POUNDS PER SQUARE INCH |
| AZTL | BODY OVERALL LENGTH | 5.500 INCHES MINIMUM AND 5.800 INCHES MAXIMUM |
| ADNQ | DIFFERENTIAL PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| AZKQ | TEMP RATING | -40.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |
| AGAV | END ITEM IDENTIFICATION | SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE) |
| CRXW | FILTERING MEDIA DESIGN | ENCASED SINGLE FILTERING MEDIA RESPONSE |
| ADNK | FLOW DIRECTION | INSIDE OUT |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING |