Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 09344 | ROCKWELL COLLINS AEROSPACE & ELECTRO |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 7TH SECONDARY QUALITY |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015/3 GOVERNMENT SPECIFICATION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.409 INCHES MINIMUM AND 0.429 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.050 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.001 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CBME | CUBIC MEASURE | 0.028 CUBIC INCHES |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| ABTB | MOUNTING HOLE DIAMETER | 0.062 NOMINAL MILS AND 0.082 NOMINAL CENTIMETERS |
| FEAT | SPECIAL FEATURES | SUBMARINE,TRIDENT |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABXF | SHAFT LENGTH | 0.080 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| ADAQ | BODY LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |