Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| C7432 | POWER COMPONENTS DEUTSCHLAND GMBH |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AGAV | END ITEM IDENTIFICATION | 3930-00-903-0899 |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | PLAIN |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| AMDL | FIRST END DIAMETER | 0.4722 INCHES MINIMUM AND 0.4727 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | SECOND END,48 SERRATIONS EQUALLY SPACED,BORE 0.500 INCH DIAMETER,0.320 INCH DEEP |
| CSPY | LARGEST STEP DIAMETER | 0.745 INCHES MINIMUM AND 0.747 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL |
| ABHP | OVERALL LENGTH | 5.688 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| AMFZ | SECOND END DIAMETER | 0.7450 INCHES MINIMUM AND 0.7470 INCHES MAXIMUM |